WELCOME!
Thank you for ordering the Verifone V240m payment terminal.
Your terminal is locked for security reasons. This guide explains how to unlock and activate your terminal, and
how to perform transactions.
You will require your Merchant Number, which can be found within your welcome pack or e-mail.
POWER UP AND ACTIVATION
1. Plug the power supply into
the power slot of the V240m
base unit ( if supplied)
otherwise connect the power
cable
2. Place the V240m terminal
onto the base unit, and
switch power on.
3. The V240m will initialise.
4. When you see the “Terminal
Locked” screen, key in your
Merchant Number as the
password and press the
green [ENTER] key
5. Press the green [ENTER]
key twice more until
the Sale Screen is displayed.
6. You are now ready to take
payments.
Your V240m terminal is pre-configured to use either the 3G mobile network or Bluetooth for communications
(If Bluetooth has been ordered)
This will allow you to authorise sales immediately.
You can also enable Wi-Fi as the primary communications method. This will allow the device to use Wi-Fi in
preference to 3G or Bluetooth.
To enable Wi-Fi, please follow the steps in the ADDING Wi-Fi section.
To Next Page
Loading...
Need help?
General
