TERMINAL SETUP
Installing a Paper Roll in the Printer
20 VX 520 GPRS CTLS INSTALLATION GUIDE
V
E
R
I
F
O
N
E
C
O
N
F
I
DE
N
T
I
A
L
TE
M
P
L
ATE
R
EV
F
To install a paper roll 1 Hook your finger under the latch and lift up to swing the paper roll cover open
(see Figure 7).
Figure 7 Opening the Printer Cover
2 Remove any partial roll of paper in the printer tray by lifting it up.
3 Loosen the glued leading edge of the new paper roll or remove the protective
strip. Unwind the paper roll past any glue residue.
4 Hold the roll so the paper feeds from the bottom of the roll.
5 Drop the paper roll into the printer tray.
Figure 8 Loading Paper Roll
6 Pull paper up past the glue residue.