VeriFone VX 520 GPRS CTLS User Manual

TERMINAL SETUP
Installing/Replacing MSAM Cards
VX 520 GPRS CTLS I
NSTALLATION GUIDE 21
V
E
R
I
F
O
N
E
C
O
N
F
I
DE
N
T
I
A
L
TE
M
P
L
ATE
R
EV
F
7 Close the paper roll cover by gently pressing directly on the cover until it clicks
shut, allowing a small amount of paper past the glue residue to extend outside
the printer door. (see Figure 9).
Figure 9 Closing Paper Roll Cover
8 Tear the paper off against the serrated metal strip in the printer.
Installing/
Replacing MSAM
Cards
When you first receive your VX 520 GPRS CTLS terminal, you may need to install
one or more MSAM cards or you may need to replace old cards.
To install or replace
MSAMs
1 Remove the power cord from the power outlet.
2 Place the terminal upside down on a soft, clean surface to protect the display
from scratches.
CAUTION
To prevent the paper roll cover from damaging the print roller, always gently press
down on the printer dust cover to close it.
NOTE
For paper ordering information, refer to Accessories and Documentation.
CAUTION
Observe standard precautions when handling electrostatically sensitive devices.
Electrostatic discharges can damage this equipment. VeriFone recommends
using a grounded anti-static wrist strap.

VeriFone VX 520 GPRS CTLS Specifications

General

Brand	VeriFone
Model	VX 520 GPRS CTLS
Category	Payment terminals
Language	English