INTEGRATED
SMART
CHIP CARD
TECHNOLOGY:
Note: Smart chip
acceptance at the
individual merchant
may depend on
setup variables.
INTEGRATED
CONTACTLESS
TECHNOLOGY:
CONTACTLESS PAYMENTS
During a sale transaction, the terminal/PIN pad will display the “Insert,
Tap or Swipe Card” prompt and the contactless symbol shown below. A
contactless enabled card or mobile phone device should be held right
above the terminal/PIN pad screen in order for the terminal/PIN pad to
read the device. Once the card is read, the terminal/PIN pad will beep
and four lights will illuminate once the card is read successfully. The
terminal will then process the contactless payment transaction as if a
card were swiped or inserted.
SMART CHIP CARD
This device supports smart chip card technology. A chip payment
card looks just like a magnetic stripe card with a chip in addition to
the standard magnetic stripe on the back of the card. The microchip
provides an additional level of authenticity for the transaction.
Stand-alone Terminal
When a customer presents a chip card, initiate a sale and then pass
the terminal to the customer. The customer inserts their card into the
chip reader at the bottom of the terminal, where it should remain until
the transaction completes. This ensures that the card never leaves
the customer’s possession and that your business does not accept
counterfeit plastics.
Terminal with Smart Chip Card PIN Pad
When a customer presents a chip card, initiate a sale and have the
customer insert their card into the chip reader at the bottom of the
PIN pad. The card should remain in the PIN pad until the transaction
completes. This ensures that the card never leaves the customer’s
possession and that your business does not accept counterfeit plastics.
To Next Page
Loading...
Need help?
General
