Verilux Rise & Shine VA05F User Manual

12
Controls — continued
Setting the Sunset/Sleep Cycle Simulator
Snooze
When the alarm sounds, you may press down on the top of the
Rise & Shine
®
-- as you would a button – to activate a 5-minute
snooze period. At 4 minutes into the snooze, an abbreviated,
one-minute wake cycle begins during which the alarm and
light progressively return to the maximum settings you have
programmed.
A sleep cycle simulates diminishing sunset lighting by beginning with the lamp on
maximum brightness, or the highest brightness you previously set, with the light
progressively dimming for the duration of the cycle until the lamp is off at the end
of the cycle.
You may start a sleep cycle whenever you wish:
• Press the
Sleep
button to begin a sleep cycle.
• Theminutesremaininginthesleepcycleareshownonthedisplay.
• Pressthe
Sleep
button repeatedly to choose 0, 5, 15, 30 or 60 minutes.
• TomanuallyendtheSleepcycle,pressthe
Off
Button, or press the
Sleep
button
repeatedly until you reach “00”. You will need to manually turn the lamp and/or
radio on, if you wish to do so.
• Tosetthemaximumlightbrightness,presstheUpandDownlightbrightness
buttons to the right of the LCD display.
You may manually turn on the radio
Radio
or a soundscape
Sound
as part of your
sleep cycle. It will turn off automatically at the end of the cycle.
Press to
Snooze
VA05F-MAN-Rev19.indd 12 8/3/12 3:03 PM

Verilux Rise & Shine VA05F Specifications

General

Brand	Verilux
Model	Rise & Shine VA05F
Category	Alarm Clock
Language	English