13
Connecting the External FM Antenna
To improve FM reception, you may wish to use the included external FM antenna:
1. Plug the 3.5 mm (1/8") plug of the FM antenna into the EXTERNAL ANTENNA
jack on the rear panel.
2. Straighten the antenna and position to establish optimum reception.
Your Rise & Shine uses a standard 60 Watt incandescent bulb.
To replace the bulb:
1. Make sure the lamp is unplugged and enough time has passed
to allow the bulb to cool.
2. Press the release button at the rear of the lamp shade and gently
pull up the shade to remove.
3. Unscrew the bulb and replace with a standard 60 Watt
incandescent bulb.
4. Align the shade and press down until the rear of the shade clicks
into place.
Note: Do not use a bulb rated higher than 60 Watts.
Replacing the Bulb
VA05F-MAN-Rev19.indd 13 8/3/12 3:03 PM
To Next Page
Loading...
Need help?
General
