Setting the Audio Encoder Properties 94
Setting the Audio Output Properties 95
Setting the Audio Decoder Properties 95
Activating Nextiva Onboard Analytics 96
Configuring Nextiva Onboard Analytics 97
Activating Agent Vi Video Analytics 98
Configuring Agent Vi Video Analytics 100
Setting the On-Screen Display for the Decoders 101
Recording to the Storage Device 102
Chapter 6: Maintaining and Troubleshooting the Device 104
Firmware Upgrade 105
Upgrading Using SConfigurator 105
Upgrading Using the Web Interface 106
Performing a Batch Firmware Update 106
Device Reboot 107
Rebooting the Device Using SConfigurator 107
Rebooting the Edge Device 107
Rebooting the Device from the Front Panel 107
Factory Default Settings 107
Restoring the Factory Default Settings Using SConfigurator 108
Restoring the Factory Default Settings 108
Restoring the Factory Default Settings from the Front Panel 108
Troubleshooting 109
Using Recovery Mode 109
Performing a Hardware Reset 109
Losing Connection to a Camera 110
SConfigurator cannot find the Device 110
Quality of the Video is Bad 111
Chapter A: Specification and Configuration 112
Technical Specification 113
Video 113
Network 114
Serial and USB Ports 114
Alarm 115
Audio 115
Power 115
Physical 116
Management 116
Optional Accessories 116
Warranty 117
Factory Default Configuration 117
Contents
6
www.verint.com/video_solutions
To Next Page
Loading...
Need help?
General
