VERITAS NetBackup 5230 User Manual

Enter the following information:
■ Storage Unit Name
Enter the name that you want to use to identify this
storage unit. The name can contain any letters,
numbers, or special characters. The name can
include up to 256 characters.
Note: The name should not start with the minus (-)
character and spaces should not be used anywhere
in the name.
■ Disk Pool Name
Enter the name that you want to use to identify this
disk pool. The name can contain any letters,
numbers, or special characters. The name can
include up to 256 characters.
Note: The name should not start with the minus (-)
character and spaces should not be used anywhere
in the name.
■ Size
Set the size for this partition by entering a precise
number in the Size field, or click and drag the box
on the gray slide bar to the desired size. The size
can be set in GB or TB units, depending on the
maximum available space.
AdvancedDisk
47Initial configuration procedures
Performing the initial configuration on a NetBackup 52xx appliance from the NetBackup Appliance Web Console

VERITAS NetBackup 5230 Specifications

General

Language version	-
License type	Corporate
License quantity	- license(s)
License term in years	1 year(s)