In addition to the downloading instructions, this procedure also includes the steps
to extract and install the downloaded files on to the client.
To download the NetBackup Administration Console package from a
NetBackup appliance to a Windows computer
1
Log into the Windows computer that you want to use for appliance access.
2
Open a browser window and enter the appliance URL.
3
In the middle of the landing page, in the section Download Packages, click
on the drop-down box and select Windows.
4
When the package file name appears under the drop-down box, right-click on
it and select either Download Linked File or Download Linked File As, then
specify the location to download the package onto the Windows computer.
For example, download the package to C:\temp or to the desktop.
5
Unzip the package.
6
Install the administration console software as follows:
■ On the client, navigate to the Addons/JavaInstallFiles directory.
■ Click on the setup.exe file.
See “Downloading NetBackup client packages to a client from a NetBackup
appliance” on page 72.
75Post configuration procedures
Downloading the NetBackup Administration Console to a Windows computer from a NetBackup appliance
To Next Page
Loading...
Need help?
General
