Vertex Standard VX-4107 User Manual

FCC ID: K6610354640
IC ID: 511B-10354640
Alignment
8
/
10
Vertex Standard Co., Ltd.
c. Press the “OK” button after finish the adjustment, then the data will be saved and the
alignment is accomplished.
Sub-Audio Deviation
This parameter is to align Sub-Audio Deviation. It must be done the alignment of “TX VCO” and
“MAX DEV”.
CTCSS Deviation <Wide>(CTCSS W)
This parameter is to align Sub-Audio CTCSS Deviation for Wide Channel. It must be done the
alignment of “TX VCO” and “MAX DEV”.
a. Press the “Start” button to start the alignment.
b. Set the value to get desired deviation (Wide: 0.6 kHz, Narrow: 0.4 kHz) on the deviation
meter by changing the Scroll Bar on your PC.
c. Press the “OK” button after finish the adjustment, then the data will be saved and the
alignment is accomplished.
DCS Deviation <Wide>(DCS W)
This parameter is to align Sub-Audio DCS Deviation for Wide Channel. It must be done the
alignment of “TX VCO” and “MAX DEV”.
a. Press the “Start” button to start the alignment.
b. Set the value to get desired deviation (Wide: 0.6 kHz, Narrow: 0.4 kHz) on the deviation
meter by changing the Scroll Bar on your PC.
c. Press the “OK” button after finish the adjustment, then the data will be saved and the
alignment is accomplished.
CTCSS Deviation <Narrow>(CTCSS N)
This parameter is to align Sub-Audio CTCSS Deviation for Narrow Channel. It must be done
the alignment of “TX VCO” and “MAX DEV”.
a. Press the “Start” button to start the alignment.
b. Set the value to get desired deviation (Wide: 0.6 kHz, Narrow: 0.4 kHz) on the deviation
meter by changing the Scroll Bar on your PC.
c. Press the “OK” button after finish the adjustment, then the data will be saved and the
alignment is accomplished.
DCS Deviation <Narrow>(DCS N)
This parameter is to align Sub-Audio DCS Deviation for Narrow Channel. It must be done the
alignment of “TX VCO” and “MAX DEV”.
a. Press the “Start” button to start the alignment.
b. Set the value to get desired deviation (Wide: 0.6 kHz, Narrow: 0.4 kHz) on the deviation
meter by changing the Scroll Bar on your PC.
c. Press the “OK” button after finish the adjustment, then the data will be saved and the
alignment is accomplished.
MIC Gain
This parameter is to align Microphone Gain in “Manufacture Mode”. This alignment needs
FRB-4 (Tuning Interface BOX).
a. Press the “Start” button to start the alignment.
b. Set the value to get desired Microphone Gain on the deviation meter by changing the
Scroll Bar on your PC.
c. Press the “OK” button after finish the adjustment, then the data will be saved and the
alignment is accomplished.

Vertex Standard VX-4107 Specifications

General

Brand	Vertex Standard
Model	VX-4107
Category	Transceiver
Language	English