Vertex Standard VX-820E Series - Emergency, Home, Tone, and Recording Features

23
VX-820E SEriES OpErating Manual
option sW2
Press the assigned programmable key to toggle the
optional accessory “2” “On” and “Off”.
EmErgEnCy
The
VX-820E
series include an “Emergency” feature
which may be useful for alerting another party moni-
toring on the same frequency as your transceiver’s
channel.
Press the assigned programmable key to initiate an
emergency call. For further details contact your Dealer.
homE
(
16-KEy & 4-KEy VErsion only
)
Press the assigned programmable key to recall the
pre-dened Home group/channel. When you recall the
Home group/channel, the “ ” notation will appear
on the LCD.
sElECtaBlE tonE
(
16-KEy & 4-KEy VErsion only
)
Press the assigned programmable key to select a sub-
audible tone (CTCSS/DCS) from the pre-dened tone
table. You can operate using the indicated sub-audible
tone in the Selectable Tone mode.
DirECt Ch#1 - #4
(
16-KEy & 4-KEy VErsion only
)
Press the assigned programmable key to recall the
Dealer pre-programmed channel directly.
aDVanCED opEration
rEC/play
(
VoiCE storagE: rEquirEs thE DVs-5
)
This function allows your radio to record a received
voice message, and to play back the recorded audio. It
requires installation of the optional Voice Recording
Unit.
Recording;
Press the assigned programmable key for 1.5 seconds
to enable the Voice Recording Mode. If the incoming
signal is received, so as to un-mute the squelch and
pass audio, the received audio will be recorded.
In the 16-key and 4-key versions, the “ ” Icon will
ash while recording and the “ ” stays on when the
voice recording is completed.
Playback;
Press the assigned programmable key momentarily to
play back the last message.
To stop the play-back, press the
TOP SEL
key.
In the 16-key and 4-key versions, while playback is
proceeding, you may press the
[
A
]
key (4-key ver-
sion) or
[
Ý
]
key (16-key version) to jump to the pre-
vious message, or press the
[
B
]
key (4-key version) or
[
#
]
key (16-key version) to jump to the next message.
Furthermore, press the
[
D
]
key to clear the all mes-
sages and stop the play-back.