25
VX-820E SEriES OpErating Manual
aDVanCED opEration
ta sCan
Press the assigned programmable key to toggle the TA
(Talk Around) scan feature “On” and “Off”.
While TA scan is proceeding, the
VX-820E
will
search both the transmit and receive frequencies (In
the 16-key and 4-key versions, the “ ” icon will
blink). When a signal is encountered on the receive
frequency, the
VX-820E
will pause until the signal
disappears (“ ” icon will appear but not blink). When
a signal is encountered on the transmit frequency, the
VX-820E
will check for activity on the receive fre-
quency every few seconds (interval programmed by
your Dealer).
arts™
(
auto rangE transponD systEm
)
This system is designed to inform you when you and
another ARTS™-equipped station are within commu-
nication range.
During ARTS™ operation, when the radio receives
the correct ARTS™ signal, a short beep will sound
and the “ ” (meaning “In Service”) notation will
be displayed on the sub-LCD
ø
. If you move out of
range for more than two minutes, your radio senses
that no signal has been received; three short beeps
will sound, and “ ” (“Out of Service”) will be dis-
played on the sub-LCD
ø
. If you subsequently move
back into range, as soon as the other station transmits,
a short beep will sound and “ ” will be displayed
again on the sub-LCD
ø
.
ø
: Except on Non-LCD version.
To Next Page
Loading...
