VX-P820/-P870 SERIES OPERATING MANUAL
16
Description of Operating Functions
M
ONITOR
Press the assigned programmable key to cancel
CTCSS- and DCS-controlled squelch; the BUSY/TX
indicator will glow green. Press and hold this button
for 1.5 seconds to hear background noise (unmute
the audio); the BUSY/TX indicator will blink green.
LAMP
Press the assigned programmable key to illuminate
the LCD for five seconds.
SCAN
The Scanning feature is used to monitor multiple sig-
nals programmed into the transceiver. While scan-
ning, the transceiver will check each channel for the
presence of a signal, and will stop on a channel if a
signal is present.
To a c tiv a te scan nin g :
! Press the assigned programmable key to activate
scanning.
! The scanner will search the channels of each chan-
nel, looking for active ones; it will pause each time
it finds a channel on which someone is speaking.
! Press the assigned programmable key again to dis-
able scanning. Operation will revert to the pro-
grammed revert channel.
Note:Your dealer may have programmed your ra-
dio to stay on one of the following channels if you
press the PTT switch during scanning pause:
# Current channel (“Talk Back”)
# “Last Busy” channel
# “Priority” channel
# “Home” channel
# “Scan Start” channel
ADVANCED OPERATION
To Next Page
Loading...
Need help?
General
