Vertex Standard VX-P870 Series User Manual

VX-P820/-P870 SERIES OPERATING MANUAL
22
DTMF CODE SET
(
16-KEY VERSION ONLY
)
You ma y s end th e d e sir ed tel ep hone nu mbe r m anu-
ally.
To dial a number manually, press the assigned pro-
grammable key, then press the desired numbers on
the front panel’s numeric key. Now, press the PTT
switch to send the telephone number. The DTMF
tones sent during the dialing sequence will be heard
in the speaker.
TA SCAN
Press the assigned programmable key to toggle the
TA (Talk Around) scan feature “On” and “Off.”
While TA scan is proceeding, the VX-P820/-P870
will search both the transmit and receive frequencies
(the “
” icon will blink). When a signal is encoun-
tered on the receive frequency, the VX-P820/-P870
will pause until the signal disappears (“
” icon will
appear but not blink). When a signal is encountered
on the transmit frequency, the VX-P820/-P870 will
check for activity on the receive frequency every few
seconds (interval programmed by your Dealer).
INDIVIDUAL CALL
(
16-KEY VERSION ONLY
)
Press the assigned programmable key to enable the
Individual Calling on the APCO Project 25 Digital
System.
To return to the Group Calling on the APCO Project
25, press again the assigned key.
To a c tiv a te the Ind i vid u al Call ing
! Press the assigned programmable key to enable
the Individual Calling
! Press the
[
!
]
key to start to input the destination
ID via the Keypad. The “
ID
--
> 0” notation will
appear on the LCD.
! Input the destination ID (Either decimal or Hex
format) via the Keypad.
! Press the
[
!
]
key, then press the PTT switch to
call the destination radio. The radio will transmit
with the destination ID.
ADVANCED OPERATION

Vertex Standard VX-P870 Series Specifications

General

Brand	Vertex Standard
Model	VX-P870 Series
Category	Two-Way Radio
Language	English