To Next PageTo Next Page
Need help?Do you have a question about the Vertical Edge 700 and is the answer not in the manual?
Keeps caller ID private for the current call. Re-apply each time.
Call back the last extension that called you using CALL RETURN or *69.
Automatically call back a busy, unanswered, or forwarded extension.
Call the last dialed number using REDIAL or #.
Dial frequently used numbers with a predefined code.
Review and dial Speed Dial numbers using display.
Erase last dialed digit or all digits using TAP.
Make a voice announcement to a specified extension using VOICECALL or *82.
Answer calls on other extensions within your group or specific stations.
Place current call on hold to answer another incoming call.
Disable Call Waiting for the current call only using *70.
Redirect all inbound calls to a predetermined destination.
Codes for parking and retrieving calls (Directed, Self, System).
Codes for picking up calls by extension or group.
Code (*69) to call back the last incoming call.
Code (Flash + *70) to answer a waiting call.
Code (*67) to block caller ID for a call.
Codes (Flash + *76, *77) for callback features and cancellation.
Codes for Centrex features and setting up conference calls.
Code (Flash + *72) to reconnect to a held call.
Codes (*41, *42) to enable and disable Do Not Disturb.
Codes (43, *44) for external/internal call forwarding and cancellation.
Code (**) to log a time stamp for troubleshooting.
Codes (*85, *86) for enabling and canceling Night Answer.
Codes (*11, *12) for system and zone paging.
Code (*98) to maintain settings when moving locations.
Code (*89) for dialing system speed dial numbers.
Code (Flash + destination ext) for transferring calls.
Code (*82) for making intercom calls.
Explanation of the Flash button's use in various features.
Adjust volume during calls and use Volume Reset Override.
Adjust screen contrast using MENU, DISP, Light, and Dark softkeys.
Adjust ring volume and select ring tones using MENU.
Block all incoming calls and pages, except Camp-on callbacks.
Access Centrex features by pressing 80 and entering a code.
Press ** to log a timestamp for troubleshooting.
Access voicemail messages and features via the MESSAGE button.
Toggle the MUTE button to prevent the other party from hearing you.
Review programmed features on buttons using MENU.
Keep settings when moving phones by pressing *98.
Program phone buttons for various features using PROGRAM.
Use RELEASE to disconnect, clear, mute, or cancel features.
Access AutoDial keys via the Shift button on specific models.
Use speakerphone instead of handset/headset with SPEAKER button.
Transfer call without announcing by dialing destination extension.
Announce call to recipient before transferring.
Transfer call directly to a voice mailbox.
Forward calls to an external number when away from office.
Forward calls to another extension when away from phone.
Cancel any active forward settings using *44.
Specify an extension to forward calls to from any phone.
Cancel Follow-Me forwarding settings using 79.
Set up conference calls with multiple participants using TRNS/CONF.
Send a page over all digital phones and overhead PA system.
Send a page to a specific group of digital phones.
Park a call for retrieval from any phone using specific codes.
Park a call on your extension for retrieval from any phone.
Park a call in one of ten system slots for retrieval.
Put a current call on hold using the HOLD button.
Retrieve a held call using TAP or the corresponding line key.
General
