LIEBERT® GXT5™ UPS
230‑V5,000–6,000VA
Quick Installation Guide
590
-1929-664A/SL-70305_REV0 1
IMPORTANT: Before installing,
connecting to supply or operating
your Liebert GXT5 UPS, please
review the Safety and Regulatory
Statements sheet. For detailed
installation, operating, maintenance
and troubleshooting information
refer to the GXT5 User Guide for
your model available at
www.VertivCo.com.
INSTALLATION
1. Inspecting the UPS
Inspect the UPS for any signs of
obvious damage. If damage is
visible, do not proceed and call
our warranty support line for
assistance at 1-800-222-5877
menu option 3, or email at
microups.warranty@vertivco.com.
2. Choosing a location
Install the UPS in a
temperature-controlled
environment that is free of
corrosive and conductive
contaminants. Avoid locations
near heat or water sources and
exposed to direct sunlight.
GXT5-5000HVRTUXLN
GXT5-5000/6000IRT5UXLN
& 5000/6000IRT5UXLE
MODEL DESIGN CONFIGURATIONS
1
2
4
5
6
7 8 93
10111613 1715
1
2 4
5
6
7 8 93
101112131415
GXT5 UPS
# Description
1 Liebert® IntelliSlot™ port
2 Terminal-block communication connectors
3
RS -485 port
4 USB port
5
RS -232 port
6 REPO connector
7 External-battery-cabinet connector
8 Output circuit breaker
9 Maintenance-bypass breaker
10 Input circuit breaker
11 Removable POD with knock-outs/cable-entry for hard-wire I/O
12
Overload protector, 10-A (x2)
13 Programmable C13 output circuit receptacles (x2)
14
Overload protector, 15-A (x2)
15 C19 output receptacles (x2)
16 C19 output circuit breaker (x2)
17
Programmable output circuit breaker, 15-A (x2)
To Next Page
Need help?
General