Vertiv Liebert MCM080 - Analog Signals Menu

NOTICE
Risk of improperly altered configuration menu settings. Can compromise equipment operation.
Changing the configuration menu settings can cause unanticipated results. These settings should be changed
only by properly trained and qualified personnel or as directed by the factory.
10.1.3 Analog Signals Menu
In the analog signals menu, F––, press ENT to enter the analog signal items described in Table 10.1 on page50. The item
ID and signal value display alternately. Figure 10.5 on the facing page, shows the operation and item structure of the
analog signals menu.
Vertiv | Liebert® MC Installer/User Guide
48