Vespa 90 - Operating Instructions; Stopping the Engine; Running-In Period

OPERATING INSTRUCTIONS
OPERATION
INSTRUCTIONS
NOTES
STOPPING THE
ENGINE
- Before stopping the engine change to
"neutral" and then operate the cut-out
button on the switch unit.
RUNNING-IN PERIOD
Up to I,000 miles the machine should never be driven at a speed exceeding 35
m.p.h. It is important of course at all times never to let the engine labour but
during its early life it is doubly important. Use your gear-box freely; never under
any circumstances allow the motor to work hard.
After first 600 miles change oil in gear box (see page 28) and check that all nuts and
bolts are tight.
- 13