English-46
17. No function
18. Play: Starts to play selected media
19. Stop: Stops the media being played
20. Rapid advance: Moves frames
forward in media such as movies
21. Pause: Pauses the media being played
22. Screen: Changes the aspect ratio of
the screen
23. Text: Displays teletext (where
available), press again to superimpose
the teletext over a normal broadcast
picture (mix)
24. My button 2 (*)
25. EPG (Electronic programme
guide): Displays the electronic
programme guide
26. Exit: Closes and exits from displayed
menus or returns to previous screen
27. Quick Menu: Displays a list of menus
for quick access
28. No function
29. Programme +/-
30. Swap: Quickly cycles between
previous and current channels or
sources
31. Source: Shows all available broadcast
and content sources
Using My button 1 (*)
Press MY BUTTON 1 for five seconds
when on a desired source, channel or link,
until the “MY BUTTON IS SET” message
is displayed on the screen. This confirms
that the selected MY BUTTON is now
associated with the selected function.
Using My button 2 (*)
This button's main function is to switch be-
tween DVB-T, DVB-C and DVB-S broad-
casts. However, if you press MY BUTTON
2 for five seconds, you can set a function to
it as described in My Button 1.
Note that if you perform first time instal-
lation, MY BUTTON 2 will return to its
default function, switching between DVB-T,
DVB-C and DVB-S broadcasts.
To Next Page
Loading...
