Caution:
In case of verified scales in II OIML class with divisions e=10d
(where: d – reading division, e – verified division) the last digit
will be marked as shown below:
7. BALANCE LEVELLING
x Operation temperature range for this device is outlined as
+15qC y +30qC;
x After powering up this device requires 30 minute worming up;
x During the worm-up time the indication can change;
x User calibration should be performed after the warm-up time.
x Temperature and humidity changes during operation can increase
measurement errors, which can be minimized by performing the
user calibration process.
8. KEYPAD
Keypad of WLC/A2 series Keypad of WLC…/C/2 series
- 11 -
To Next Page
Loading...