x The inscribed value confirm by pressing , the program will
automatically go to the main window,
x During setting threshold values following cases take place:
Notice:
If a user erroneously enters a value of the lower threshold higher than
the upper one, the scale will indicate an error message and will return
to weighing.
Return to weighing:
xPress the
key twice.
16.5. Control of % deviation referring to the inscribed standard mass
Scale software enables control of deviation (in %) of weighed loads
mass referring to the inscribed standard mass. Mass of standard can
be determined by its weighing (PrcA function) or entered to the scale
memory by an user (PrcB function).
- 40 -
To Next Page
Loading...