Vetek WLC 1/A2 - Keys Functions

Keypad of WLC C1…C2 series Keypad of WLC/B1 series
Notice:
Scales of WLC/A2 series are equipped with an additional key
for
tarring and has no additional functions but the keypad of the WLC…/C/2
scale include an additional key
for direct starting the process of
internal calibration. Because the functionality and operation of the
rest of the keys is the same, the further part of this manual
describes the keypad of WLC C1…C2 series.
9. KEYS’ FUNCTIONS
Switching on/off
Function key (operation mode selection)
Sending a weighing result to RS232
Zeroing
Tarring
Manual internal calibration (WLC…/C/2 scales)
Notice:
After pressing
+ keys’ functions changes. The way of operation
in this mode is described in details further in this manual.
- 12 -