Install mounting pad and wired mounting bracket to the
handlebar using the 2 zip ties provided. (Fig. 6)
Tighten the zip ties so that the mounting bracket holds
its position on the bars yet can be easily adjusted. (Fig. 7)
Trim excess. CAUTION: Do not use zip ties but tapes
provided to hold wires to the frame, fork, bars or
stem to avoid damaging or cutting the wires
accidentally.
MOUNTING BRACKET
Wired Mounting Bracket
Head Unit
Zip Tie
Mounting Pad
Handlebar
Step 1:
Step 2:
Fig. 6
To Next Page
Loading...
