The splitter regulates the volume of gas.
The figure only shows 6 valves. Please pay attention to the
delivery model in the package if you need to buy.
1. Air volume control knob: Turn this knob to adjust the volume of air.
2. Valve switch: Turn the switch to adjust the air volume from the pond
aeration.
OPERATION
1. Working Voltage: Use 110VAC, single phase and 60Hz. The pond
aeration working at lower voltage (100VAC) or higher voltage(120VAC) will
be deemed as improper operation, and this will likely cause pond aeration
damage.
2. Working Environment Temperature: 0°C-35°C with good and smooth
ventilation to prevent high temperature.
3. Ground lead should be well connected before using the pond aeration.
Touching the power source with wet hands is not allowed.
Shunt valve design allows more air circulation
To Next Page
Loading...
