What does E02 error mean on a VEVOR ICM-270P Ice Maker and how to fix it?
An E02 error on your VEVOR Ice Maker suggests a possible high ambient temperature, poor condensation, refrigerant leakage, or insufficient water. Check the condensing cooling system, refrigeration system, pool, and drain holes for leaks.
What does E06 error mean on a VEVOR ICM-270P and how do I troubleshoot it?
If your VEVOR Ice Maker displays error E06, this indicates excessive condensation temperature or a blockage in the refrigeration system. Check the system pressure or the cooling system.
What does E03 error mean on a VEVOR ICM-270P and how can I resolve it?
An E03 error on your VEVOR Ice Maker could mean the heating valve has failed, the condensation temperature is too low, the ice is too thin, or the water supply is too small. Check the heating valve circuit, the ice thickness detector, or the inlet system.
What causes the E01 error on a VEVOR Ice Maker?
The E01 error on a VEVOR Ice Maker is caused by a skateboard vacancy, polarity reversal of magnetic induction elements, or an abnormal ice-filled switch. You should perform an inspection and repair to resolve this.
What does E07 error mean on a VEVOR ICM-270P and what should I check?
When your VEVOR Ice Maker shows an E07 error, it indicates sensor damage or a connector problem. Check the related components.
What does error E08 mean on my VEVOR Ice Maker?
Error E08 on your VEVOR Ice Maker indicates sensor damage or a connector problem. You should check the related components.
What does error code E11 mean on my VEVOR ICM-270P?
Error code E11 on your VEVOR Ice Maker indicates condensate temperature issues. Check related components.
Covers warnings on ventilation, defrosting, refrigerant circuit, electrical appliances, cord placement, and socket usage.
Guidelines for child supervision, intended environments, and storage of hazardous materials.
Covers safety warnings regarding cord damage, placement, servicing, water, cable management, and socket requirements.
Critical warning about the risk of fire and flammable materials during operation and installation.
Step-by-step instructions for setting up the ice maker, including unpacking and water/drain connections.
Instructions for connecting the water filter and inlet tube to the water supply and machine.
Specific guidance and illustration for correctly connecting the water drainage pipe.
Important notice requiring the unit to stand static for 24 hours before first use and discarding initial ice batches.
Instructions for connecting to power and initiating the ice-making process.
Description of the ice maker's control panel interface and indicators.
Details key technical parameters such as model, power supply, net weight, and dimensions.
Lists fault codes, phenomena, causes, and recommended treatment measures for machine errors.
General| Model | ICM-270P |
|---|---|
| Ice Production Capacity | 270 lbs/24h |
| Ice Storage Capacity | 77 lbs |
| Voltage | 220-240V |
| Refrigerant | R290 |
| Material | Stainless Steel |
| Dimensions | 21.7" x 24.4" x 62.2" |
| Production Capacity | 270 lbs/24h |
| Frequency | 60Hz |
| Ice Cube Size | 0.9" * 0.9" * 0.9" |
| Water Tank Capacity | Unknown |
To Next Page
