VEVOR LB100T User Manual (English)

Questions and Answers:

K
Kyle LopezAug 14, 2025
Why is the ice block from my VEVOR LB100T Ice Maker thin?
- J
  Jane CrossAug 14, 2025
  If the ice block produced by your VEVOR Ice Maker is too thin, several factors could be responsible. First, try cleaning the surface of the condenser, as dust accumulation can cause this issue. Ensure that the ambient temperature is within the recommended range for the machine. Also, check for refrigerant leaks and recharge if necessary. Other potential causes include a broken fan motor (replace it), a blocked spray tube (clean it), or an ice thickness sensor positioned too close to the ice model (adjust the sensor screw by turning it to the right).
D
dennisspencerAug 17, 2025
What to do if the ice can not drop off from VEVOR Ice Maker?
- R
  richardsondylanAug 17, 2025
  If the ice isn't dropping off in your VEVOR Ice Maker, the ice thickness sensor might be broken, and you should replace it. Another potential issue is that the solenoid valve isn't opening. Check the electric wire to ensure it's properly connected, and if not, replace the solenoid valve. Finally, the ambient temperature may be too low; ensure you're using the machine within the allowable ambient temperature range.
M
Mr. Antonio Holden PhDAug 20, 2025
What to do if no water flowing on to the ice model in VEVOR Ice Maker?
- M
  michael50Aug 20, 2025
  If there is no water flowing onto the ice model in your VEVOR Ice Maker, the water pump or the PC board may be broken, and you should replace it.
D
David RileyAug 25, 2025
What to do if the sink is overflow in VEVOR LB100T?
- S
  Stacy JonesAug 25, 2025
  If the sink is overflowing in your VEVOR Ice Maker, the water supply solenoid valve or the water level sensor might be broken, and you should replace it.
J
Jordan RuizAug 27, 2025
How to fix loose connecting wire of compressor’s starter in VEVOR LB100T Ice Maker?
- C
  Charlotte MortonAug 27, 2025
  If the connecting wire of the compressor’s starter is loose on your VEVOR Ice Maker, check and fasten it.
F
ffreemanAug 30, 2025
What to do if the starting capacitor of compressor is broken in VEVOR Ice Maker?
- E
  Emma LucasAug 30, 2025
  If the starting capacitor of the compressor in your VEVOR Ice Maker is broken, replace it.
T
Thomas WillisSep 3, 2025
What to do if water level sensor is broken in VEVOR LB100T Ice Maker?
- A
  Alexa HoltSep 3, 2025
  If the water level sensor is broken in your VEVOR Ice Maker, replace it.
G
greedSep 6, 2025
What to do if water pump is broken in VEVOR LB100T?
- J
  Jason BenjaminSep 6, 2025
  If the water pump is broken in your VEVOR Ice Maker, replace it.
J
jacqueline16Sep 9, 2025
What to do if PC board is broken in VEVOR LB100T?
- G
  gsalinasSep 9, 2025
  If the PC board is broken in your VEVOR Ice Maker, replace it.

VEVOR LB100T Specifications

General

Model	LB100T
Power Supply	115V/60Hz
Ice Type	Cube
Refrigerant	R290
Ice Production Capacity	100 lbs/24h
Ice Storage Capacity	33 lbs
Weight	63 lbs
Climate Type	N
Ice Size	0.9 x 0.9 x 0.9 inches

Summary

Important Safeguards

Safety Alert Symbol and Definitions

Explains safety alert symbol, WARNING, and CAUTION terms.

Correct Disposal Guidelines

Proper disposal guidelines according to European Directive 2012/19/EU.

Ice Storage Warning

Warning that ice cannot be stored in the bin overnight as it melts.

General Safety Warnings

Fire Warning Symbol and Flammables

Identifies fire warning symbol and flammable materials in the appliance.

Basic Operational Safety

Essential safety practices for fire, shock, injury, and installation.

Environmental & Electrical Safety

Precautions for humidity, power outlet ratings, and grounding.

Operational Safety Guidelines

Usage Restrictions & Child Safety

Rules for children's use, supervision, and general usage restrictions.

Placement & Ventilation Requirements

Requirements for placement, ventilation, and avoiding obstacles.

Operational Hazard Warnings

Warnings about tipping, cords, liquids, children climbing, and water quality.

Power Cord & Maintenance Safety

Safe placement of power cords and unplugging for maintenance.

Material Safety & Repair

Combustible Materials & Disposal

Information on combustible materials and proper disposal.

Package Contents

Accessory List

Lists included accessories like water filter, ice scoop, drainage pipe.

Basic Structure Overview

Component Identification

Lists and identifies various parts of the ice maker based on a diagram.

Important User Notices

Water Filter & Descaling Advice

Advice on using water filter and regular descaling for maintenance.

Initial Operation & Temperature Notes

Notes on initial ice making time and ambient temperature effects.

Installation Instructions

Accessory Installation Steps

Guides on installing inlet pipe, filter, and drainage pipe accessories.

Drainage System Installation

Gravity vs. Electric Drainage

Explains Gravity Drainage and Electric Drainage methods.

Technical Specifications

Performance Parameters

Details on voltage, lift, power, noise, temperature, and consumption.

Control Panel & Display Guide

Display Indicators & Mode Selection

Explains status indicators (Clean, Full, Freeze, etc.) and mode selection.

Button Functions Explained

Describes the function of on/off, mode, clean/set, and adjustment buttons.

Error Code Reference

Lists and explains various error codes (E01-E08).

Ice Thickness & Maintenance

Ice Thickness Setting Reference

Provides a reference list for ice-shedding time based on ambient temperature.

Daily Cleaning Procedures

Outlines basic cleaning steps for the ice maker.

Cleaning Details & Warnings

Safe Cleaning Agents & Methods

Advises on safe cleaning agents and methods for panels and interior.

Filter Screen Dust Removal

Instructions for cleaning the filter screen to maintain performance.

Maintenance Procedures

Spray Water Pipe Cleaning

Details on cleaning the spray water pipe for optimal ice making.

Automatic Cleaning Function

Explains how to activate and use the machine's auto-cleaning cycle.

Troubleshooting Guide

Ice Making Failure Solutions

Analyzes why the machine might not make ice and provides solutions.

Long-Term Storage Instructions

Steps for proper shutdown and storage if the machine is unused for a long time.

Troubleshooting Common Issues

Sink Overflow & Water Flow Problems

Addresses issues like sink overflow and no water flow to the ice model.

Ice Block Quality Issues

Explains causes for thin ice blocks and how to fix them.

Technical Parameters & Wiring

Ice Drop Failure Solutions

Solutions for ice that cannot drop off properly.

Parameter & Diagram Location

Indicates where to find technical parameters and wiring diagrams.

Related product manuals