19
Frequency range: 40Hz~1000Hz
DC current
Range Resolution Accuracy
600uA 0.1uA
±(0.8% reading +3 digits)
6mA 1uA
60mA 10uA
600mA 100uA ±(1.0% reading +3 digits)
6A 1mA ±(1.2% reading +3 digits)
10A 10mA
Maximum input current of mA jack: 600mA
Maximum input current of 10A jack：10A
Temperature
Range Resolution Accuracy
-20℃~1000℃ 1℃
±(2.0% reading +2 digits)
-4℉~1832℉ 1℉ ±(2.0% reading +2 digits)
Instrument maintenance
This section provides basic maintenance information, including instructions for
replacing fuse tubes and batteries. Unless you are an experienced maintenance
technician and have relevant calibration, performance test and maintenance data,
do not try to repair this instrument
Warning：
To prevent possible electric shock, fire or physical injury:
· When the shell is opened, do not use the instrument for any measurement
operation.
· Remove the input signal before cleaning the instrument.
· Designated replacement parts should be used. Please have the instrument
repaired by an approved technician.
To Next Page
Loading...