VEVOR S3018 Pro User Manual

1/14
S3018 Pro
CNC Engraving Machine
Catalog
1. Pa Li...2
2. Machine Assembly....................................................3
3. Control board and Laser.............................7
4. Candle Sofae............7
5. Lae Gbl Sofae..............................................................11
6. Offline Conolle ....13
7. Restore factory setting..................................14
8. Online guide and video...................................14
Safty Notice
Avoid direct laser radiation on eyes or skin
Away from children
Always wear protective glasses when use the laser
Prohibited from use in flammable objects or gases
Please cut off the power immediately in case of emergency
Shutdown steps: first cut off the power, then pull out the USB cable
Precautions
(1). All parts description just for illustrative purpose. If there is any difference, please refer to the actual part shape.
(2). Please make sure that the machine is under care when it is working.
(3). If your machine is equipped with an offline controller, please note that the offline controller and the computer
cannot be connected to the engraving machine at the same time, otherwise it will not work normally.
(4). If the U disk in the machine kit can't be read, please scan the QR code to see how to download the software and
related content.
Scan for videos and guides
S3018 Pro Ver 2.3

VEVOR S3018 Pro Specifications

General

Brand	VEVOR
Model	S3018 Pro
Category	Printer
Language	English

Summary

Safty Notice

Precautions

Parts List

Machine Assembly

Control Board and Laser

Control Board Connection

Connect motors and power to the machine's control board.

Laser Instructions

Guidance on laser setup, focusing, and safe operating procedures.

Candle Software

States

Explains machine states and coordinate systems within the Candle software.

Control

Details on using Candle software controls for machine operations.

Software Using Steps

Steps for installing drivers, setting up connections, and configuring Candle.

Laser GRBL Software

Download and Installation

Instructions for obtaining and installing the Laser GRBL software.

Online Operation Steps

Guide to connecting the machine and preparing files for laser engraving.

Engraving Effect

Tips on adjusting power, speed, and depth for optimal engraving results.

FAQ

Answers common questions on laser power, file formats, and connection issues.

Offline Controller

Main Page

Overview of the offline controller's main interface and navigation.

Control Page

Details on manual axis movement and spindle control.

File Page

Instructions for selecting and confirming engraving files from the SD card.

Confirm Engraving Page

Final confirmation step before starting the engraving process.

Settings Page

Configuration options for baud rate and feed rate adjustments.

WiFi Network

Guide to connecting the controller to a WiFi network for file management.

FAQ

Restore Factory Settings

Assembly Video and Online Guide