VEVOR S1610 User Manual

1/14
S1610
CNC Engraving Machine
Catalog
1. Part List...2
2. Machine Assembly....................................................3
3. Control board and Laser.............................7
4. Candle Softare............7
5. Laser Grbl Softare..............................................................11
6. Offline Controller ....13
7. Restore factory settings..................................14
8. Online guide and video...................................14
Safty Notice
Avoid direct laser irradiation on eyes or skin
Away from children
Always wear protective glasses when use the machine
Prohibited from use in flammable objects or gases
Please cut off the power immediately in case of emergency
Shutdown steps: first cut off the power, then pull out the USB cable
Precautions
(1). All parts description just for illustrative purpose. If there is any difference, please refer to the actual part shape.
(2). Please make sure that the machine is under care when it is working.
(3). If your machine is equipped with an offline controller, please note that the offline controller and the computer
cannot be connected to the engraving machine at the same time, otherwise it will not work normally.
(4). If the U disk in the machine kit can't be read, please scan the QR code to see how to download the software and
related content.
Scan for assembly videos
S1610 Ver 1.2

VEVOR S1610 Specifications

General

Model	S1610
Print Resolution	203 DPI
Printing Size	4" (104mm)
Printing Technology	Direct Thermal
Maximum Print Width	4" (104mm)
Connectivity	USB
Supported Barcode Types	Code 39, Code 128, UPC-A, UPC-E, EAN-8, EAN-13, ITF-14, Codabar, QR Code
Supported Label Materials	Thermal Paper
Label Width Range	25.4-115 mm (1-4.5")
Label Thickness Range	0.08-0.18 mm
Memory	8MB Flash
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	41°F - 104°F (5°C - 40°C)
Operating Humidity	20% - 85% RH (non-condensing)
Storage Humidity	10-90%

Summary

Parts List

Machine Assembly

Control-Board and Laser

Control Board Connection

Instructions for connecting the control board, including spindle and stepper motor polarity.

Laser Module Instructions

Guidelines for using the laser module, focusing, and safety precautions.

Candle Software

States and Coordinates

Explains work/machine coordinates and CNC status indicators like Idle, Running, Hold.

Control Functions

Details control functions like Home, Z-probe, Zero XY, Restore XYZ, Safe Z, Reset, Unlock.

Software Setup and Connection

Guides on installing drivers and setting up the connection port and baud rate in Candle software.

Laser GRBL Software

Software Download and Installation

Instructions for downloading and installing Laser GRBL software and its USB driver.

Online Operation Steps

Steps for connecting the device, focusing, and importing/preparing images for engraving.

Engraving Effect Factors

Laser GRBL Software FAQ

Answers common questions related to Laser GRBL software operation and connection.

Offline Controller

Controller Interface Navigation

Describes the main, control, file, and settings pages for axis movement and spindle control.

WiFi Network Configuration

Explains how to connect to the WiFi hotspot and manage files via the web interface.

General FAQ and Laser Usage

Laser Usage and Troubleshooting

Provides guidance on laser operation, focusing, and common issues like weak power or reversed images.

Restore Factory Settings

Assembly Video and Online Guide