VEVOR SBC90 - Main Specifications; Safety Instructions

- 2 -
1. Description
The SBC90 shot blasting cabinet is constructed of steel with a transparent
access lid on top with internal illumination. The inside of the viewing screen
is replaceable.
Supplied with a shot blasting gun the unit is suitable for glass beads, silicon
carbide, aluminum oxide, silica sand and any other dry media. This unit is
excellent for use in a wide variety of workshop.
2. Main specifications
Max Air
Pressure
40-120psi
Weight
15.5KGS
Average Air
Flow
142 liter/min
Work Height
Max 380 mm /Min
300 mm
Nozzles
4.5,5,6,7 mm
Air Inlet Size
¼ BSP”
Capacity
0.09 m³
Viewing Area
400*295 MM
3. Safety instructions
Warning-To reduce the risk of injury, user must read instructions
manual carefully.
Notice: Any blast cabinet will produce a powerful flow of abrasive particles.
To avoid personal injury or property damage study this Manual thoroughly
before assembling, operating or servicing this blast cabinet.
Please read instructions before operating the blasting system!
Failure to follow these instructions could result in operator injury as well as
damage to the blasting system.
3.1. ELECTRICAL SAFETY
REGARDING DIRECT MAINS POWER USE WITH THE TRANSFORMER