If the cutting plotter will not be used for
a long time, please unplug the power
cord from the socket. Otherwise it will
cause a fire.
When operating, do not put your hands
on the reel. This may cause injury.
The machine should be positioned on a
stable surface. Otherwise, the machine
may topple, causing injury.
When disconnecting the power cord
from the socket, please pull the plug,
not the cable. Pulling on the cable can
cause electric shock or fire.
Using the machine during
thunderstorms and lightning weather is
prohibited to prevent lightning damage
to the machine.
Before inserting the power plug, check
whether the power supply voltage and
power cable are normal. Make sure there
are no exceptions before you plug in the
device.
To Next Page
Loading...
