What to do if my VEVOR WP9600A won't charge?
If your VEVOR Analytical Instruments device isn't charging, first examine the charging port for any foreign material or deformities. Then, check if the charger itself is damaged. Also, if the battery is extremely low, charge it promptly to prevent complete discharge, which can make it unable to charge.
Why can't I save photos or videos on my VEVOR Analytical Instruments?
If your VEVOR Analytical Instruments device is unable to save photos or videos, verify that the memory card is not damaged and replace it if necessary. Also, inspect the memory card slot for any foreign objects or deformities.
What to do if my VEVOR WP9600A Analytical Instruments is not running?
If your VEVOR Analytical Instruments device is not running, first ensure that the battery has sufficient power. Next, inspect the display screen for any damage. Finally, confirm that the display screen is properly connected to a power source.
How to prevent cable knotting in VEVOR Analytical Instruments?
To prevent cable knotting with your VEVOR Analytical Instruments, ensure that the cables do not cross or knot when retracting and releasing them, and that the bending radius of the cables is not less than 90 degrees. When retracting the cable, use the rotating iron frame to recycle it in an orderly manner, avoiding forceful actions.
What causes LED light problems in VEVOR WP9600A?
If you're experiencing issues with the LED lights on your VEVOR Analytical Instruments, first consult the manual to ensure you are turning on the light correctly. Secondly, check for any water in front of the camera, as this could prevent the LED from lighting up.
Why can't I format the memory card in my VEVOR WP9600A Analytical Instruments?
If you are unable to format the memory card in your VEVOR Analytical Instruments, it is likely that the memory card is damaged. Replace the memory card to resolve this issue.
Navigating and adjusting device settings within the main menu options.
Steps for starting, stopping, and switching between recording and photographing modes.
General| Dimensions | 420 x 560 x 500 mm (16.5 x 22 x 19.7 inches) |
|---|---|
| Weight | Approx. 45 kg (99 lbs) |
| Type | Laboratory Water Purification System |
| Purification Method | Reverse Osmosis |
| Output Water Quality | Ultrapure Water |
| Feed Water Temperature | 5-40°C |
| Operating Temperature | 5-40°C |
| Operating Humidity | <80% |
| Model | WP-9600A |
To Next Page
