To Next PageTo Next Page
Need help?Do you have a question about the Vexta FBL II Series and is the answer not in the manual?
Safety guidelines for installing the motor and driver to prevent damage or hazards.
Safety guidelines for operating the motor, including temperature and power handling.
Guidance on troubleshooting issues and contacting support if problems persist.
Instructions to check if all motor, driver, and accessory components are present and undamaged.
Details on available motor and driver combinations and type selections.
Procedures and considerations for installing the motor, including mounting orientation.
Guidelines for installing the driver, covering mounting methods and spacing for multiple units.
Identifies and explains the functions of the driver's front panel terminals and indicators.
Illustrates typical wiring diagrams for single-phase and three-phase power inputs.
Details on connecting motors to drivers using provided connectors and extension cables.
Information on selecting appropriate terminal rings and connecting power supplies.
Explains three methods for setting motor speed: internal/external potentiometers and DC voltage.
Describes the circuits for input signals like EXT. VR, CW, CCW, and SLOW DOWN.
Details the output circuits for speed signals and alarm signals, including connection examples.
Provides measures to prevent malfunctions caused by excessive external noise.
Outlines requirements for motor operation to prevent overheating and ensure longevity.
Explains various protection functions like overload, overheating, and overvoltage, and their responses.
Provides a timing chart illustrating motor operation patterns with different inputs.
Details modes for signal input, CW/CCW operation, stopping, and changing speeds.
Explains how to operate multiple motors simultaneously using DC power supply or external potentiometers.
Presents speed-torque curves for continuous and limited duty regions.
Shows how driver input current relates to load torque at steady speeds for different models.
Lists general specifications for motors, including insulation, temperature, and IP class.
Lists specifications for drivers, including input power, current, speed range, and temperature ratings.
General