VGC VR-N76 - Vfo;Channel Switching; Locked the Keypad; Set the VFO Frequency

3
5.5 VFO/Channel switching
In standby mode, press and hold the * key to switch between VFO and channel.
5.6 Locked the Keypad
In standby mode, long press the # key to lock the keyboard,
long press the # key again to unlock the keyboard.
5.7 Set the VFO frequency
※ Set the VFO frequency of the radio through the keyboard:
When the radio is in VFO mode, you can input the frequency of the main
channel through the number keys, if you want to input 434.62500MHz, just
input 【4】 【3】【4】【6】 【2】【5】【0】【0】. Press * key to set step
frequency, press # key to switch AM/FM mode.
※ Adjust the VFO frequency/channel by the up and down arrow buons:
When the radio is in VFO mode, click the up and down arrows to adjust the
frequency/channel by increasing/decreasing the step value. Up adjustments
increase frequency values/channels, and down adjustments decrease
frequency values/channels.
11