5.11 Frequency Scanning
Open the frequency scan menu, input the start frequency that you want, * key
to switch the input frequency step, # key to switch the scan step, press the le
and right arrows to start scanning, le to scan the frequency down, and right to
scan the frequency up.
5.12 Tone Scanning
Set the frequency to be scanned on the standby page, open the Tone scan
menu,it start working.
5.13 Bulk air copy
Turn on the radios to be programmed one by one, switch the menu to “ receive
channels”, open the programmed radio and switch the menu to “send channel “,
when each radio to be programmed is displayed as completed, the frequency of
the current list will be was copied to another radios.
5.14 FM Radio
Open the FM radio menu and press the up and down buons to automacally
search for FM radio frequencies. You can also enter your radio frequency
directly using the keypad.
13
To Next Page