VGC VR-N76 - Storage Frequency; Saving Frequencies with CTCSS;DCS

5.8 Storage frequency
In VFO mode, enter the frequency you want through the number keyboard,
such as 438.500, press OK to confirm, press the menu "save tochannel", select
a blank channel to save.
5.9 Saving frequencies with CTCSS/DCS
In VFO mode, input the frequency you want through the number keyboard,
such as 438.500,press OK to confirm,Open the radio seng menu, enter the
transmit TX/RX subtone menu, select the required subtone frequency. press
OK to exit,press the menu "save to channel", select a blank channel to save.
Tips:In the CTCSS selecon interface, use the keyboard to input the
corresponding CTCSS number within 1 second, and you can quickly adjust
to the corresponding CTCSS value.
For example: 754N. You only need to enter 75, 754N will be displayed.
Select it to set it successfully.
5.10 Edit channel
Open the channel list menu, click Edit, edit the channel content, and save it.
12