Technical Support tac@viavisolutions.com 1-844-468-4284
Viavi T-BERD 5800
CPRI Testing Guide with ALU BBU
Emulation
Version 4
January 2018
Firmware 26.0.0.6c1973b or Later REQUIRED!
Scope
This document describes Common Public Radio Interface (CPRI) testing procedures. This document
is intended to be a method of procedure (MOP) for configuring CPRI test setups, running tests,
analyzing results, and creating reports with the Viavi T-BERD 5800v2. This document is not intended
to be a user guide. This MOP should be used in conjunction with T-BERD User’s Guides for detailed
explanation of all testing options.
This document describes three test applications for the CPRI Check test: Verifying provisioning and
operation of CPRI Radio Equipment such as a Remote Radio Unit (RRU) unit