Vibe 7 Series - CVEN Stereo 4 Terminals and Connections; Channels 3;4 Gain Control; Channels 3;4 Bass Boost; Channels 3;4 Phase Shift

1. CH 3/4 Gain control
This control is used to match the input signal of the source to the amplier for channels 3 and 4. See
the setup section for more details.
2. CH 3/4 Bass boost control
This control is used to add bass boost to the amplier for channels 3 and 4 and is variable between
0dB and +12dB and is centered at 45hz
3. CH 3/4 Phase shift control
This control is used to alter the output phase of the amplier for channels 3 and 4 and is variable
between 0° and 180°
4. CH 3/4 Subsonic lter control
This control is used to limit the very lowest frequencies passed to the speakers and is variable
between 15Hz and 40Hz.
5. CH 3/4 Low Pass Filter (LPF) control
This control is used to set the crossover frequency for channels 3 and 4 when LPF is
selected. The frequency is adjustable between 40Hz and 600Hz or 400Hz and 6000Hz depending on
the position of the multiplier switch.
6. CH 3/4 Low Pass Filter (LPF) frequency multiplier switch
This switch is used to select the frequency multiplier for the low pass lter for channels 3 and 4.
x 1 and x10 settings are selectable.
7. CH 3/4 Low Pass Filter (LPF) select switch
This switch is used to turn the LPF on or off for channels 3 and 4.
1 2 3 4 5 6 7 8
11 12 13 14 15
9
1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 910 11 12 13 14
10
16 17
15 16 17 18 19 20 21 22 23
18 19 20 21 22 23 24
24 25 26 27 10 1211 13 141428 29 30
8
CVEN Stereo 4 Terminals And Connections