Vibrapower HIIT ETF010C - Operating Instructions; Getting Started and Setup

5
INSTRUCTIONS FOR USE OWNERS MANUAL
BEFORE YOU START
When handling your Vibrapower™ HIIT,
make sure you use the handles on both
sides of the machine to move it around.
Choose a suitable place for your
Vibrapower HIIT and workout. Place the
machineonasolid,atlevelsurfacewith
asuitablecoverforyouroororcarpet.
Insert 2 x AAA batteries into the remote
control unit.
ATTACHING THE RESISTANCE BANDS
To attach the resistance bands to your
Vibrapower HIIT, loosen the rubber
foot pad (1), then using the Allen key
provided, release the screw (2).
Slide out the metal bar (3) so the hole
in the end is protruding. Tighten up the
screw (2) with the Allen key and screw
on the rubber foot pad (1). Attach the
resistance band using the carabiner clip
through the hole in the end of the metal
bar (3). Make sure that the carabiner clip
is locked into place.
3
2
1
3
2
1