Need help?Do you have a question about the Vicon Andex 714 T Evo and is the answer not in the manual?
General| Brand | Vicon |
|---|---|
| Model | Andex 714 T Evo |
| Category | Farm Equipment |
| Language | English |
Identifies the intended audience for the manual.
Explains the meaning of symbols and pictograms used throughout the manual.
Provides general safety instructions and precautions for safe operation.
Illustrates and explains safety-related labels attached to the machine.
Specifies the qualifications and conditions for operating the machine.
Covers essential safety procedures like switching off the tractor and personnel safety.
Safety precautions and instructions related to coupling the machine to the tractor.
Safety guidelines for operating and maintaining the hydraulic system.
Safety instructions and regulations for transporting the machine on public roads.
General safety guidelines and precautions to be followed during machine operation.
Safety procedures and risks associated with uncoupling the machine from the tractor.
Safety recommendations for performing maintenance and care tasks on the machine.
Additional safety regulations and warranty conditions to be observed.
Defines the intended use and scope of the machine.
Specifies the correct methods and limitations for operating the machine.
Details the main characteristics and capabilities of the machine.
Identifies and labels the various parts of the machine.
Provides detailed technical data and dimensions of the machine.
Lists the weight specifications for the machine in different configurations.
Specifies the necessary tractor attachments and connections for operation.
Details the standard and optional equipment included with the machine.
Reports the measured airborne sound emissions levels of the machine.
Instructions for verifying all parts are present upon delivery.
Guidance on checking and adjusting the PTO shaft length for correct installation.
Instructions for replacing the PTO shaft, including specific regional considerations.
Step-by-step guide for shortening the PTO shaft to the correct length.
Procedures for correctly installing and securing the PTO shaft.
General safety precautions and overview of coupling steps.
Details on coupling the machine using fixing pins and rip chains.
Step-by-step instructions for attaching the machine to a pending attachment.
Instructions for coupling the machine to a lift link drawbar, including height and lateral settings.
Guidance on adjusting the drawbar cylinder based on equipment and ground conditions.
Procedures for correctly coupling the PTO shaft, including spacing and guards.
Instructions for removing and storing wheel chocks after coupling.
Steps for connecting the electrical cables and lighting equipment.
Safety and procedural guidelines for connecting the machine's hydraulic system.
Detailed instructions for connecting hydraulic lines and identifying correct couplings.
General safety precautions to observe before preparing the machine for operation.
Step-by-step guide for performing general adjustment work on the machine.
Instructions for adjusting the rotor pitch to optimize raking quality.
Explains how to set and check the working depth for optimal performance.
Guide for adjusting the optional support wheel for better ground adaptation.
Instructions for adjusting contact rollers to match ground contours and improve running.
Instructions for fitting tine savers to ensure parallel tine leg alignment for good swath deposit.
Details regulations and safety measures for driving the machine on public roads.
Procedures for cleaning the machine, closing the ball valve, and observing terrain.
Step-by-step guide on how to fold the machine for transport.
Instructions for folding the swath former into its transport position.
Procedure for aligning the rotors correctly for road transport.
Instructions for placing the additional swath former into its park position for transport.
Steps for securing tine supports in the transport holder.
How to secure rotors and tine supports for safe road travel.
Instructions for pushing in and locking the deflector bars for minimum transport width.
A checklist to ensure the machine is properly prepared for road transport.
General safety precautions to observe before making preparations on the field.
General procedures and safety checks before field preparations.
Overview of the possible types of swath deposit configurations.
Procedures for setting up the machine for single swath operation.
Instructions for setting up the machine to create two single swaths.
Basic adjustments and checks required after road transport before field use.
Steps to lower the machine into its work position on the field.
Instructions for correctly fitting and securing tine supports.
Instructions for fitting and adjusting deflector bars for different swath types.
Adjusting the rear swath former for width and direction of travel.
Instructions for adjusting the additional swath former for width, height and direction.
Key safety guidelines for operating the machine, including PTO speed and personnel safety.
Overview of operational worksteps and considerations for working speeds and swath width.
Step-by-step process for performing the swathing operation.
Explanation and operation of the 3-way ball valve for controlling functions.
Procedures for safely driving the machine on headlands.
Essential safety measures to follow before and during cleaning and care operations.
Procedures for cleaning the machine after each use.
Recommendations for long-term care and maintenance of the machine.
Important safety guidelines to follow when parking and storing the machine.
General instructions for uncoupling and preparing the machine for storage.
Step-by-step procedures for safely uncoupling the machine from the tractor.
Tasks to perform when storing the machine for an extended period.
Essential safety measures and requirements for performing maintenance work.
Guidelines for safe handling of oils and lubricants, including skin protection and disposal.
General steps and direction conventions for performing maintenance.
Definitions of maintenance tasks and their recommended schedules.
Instructions and specific torque values for tightening screwed connections.
Identifies lubrication points and procedures for applying grease.
Instructions for lubricating PTO shafts, including guard components and profile tubes.
Specifies oil capacities for gearboxes and inspection methods.
Safety warnings and checks for tyres and tyre pressure.
Safety and procedures for maintaining the hydraulic system and replacing hoses.
Instructions for fitting tine savers to ensure proper tine alignment.
Information on optional contact rollers for improved ground adaptation.
Details on fitting the optional support wheel for better ground adaptation.
Information on the height-adjustable parking stand for easier coupling.
Details on the optional additional swath former for the front rotor.
Information on the optional lift link drawbar accessory.
Note on the optional spare wheel being fitted to the frame.
A table listing common problems, their causes, and solutions for quick fault resolution.
Illustrates the connections within the machine's hydraulic system.
Shows the wiring and connections for the machine's lighting system.
Guidelines for proper and environmentally friendly disposal of machine parts.
Details the product, model, and machine number covered by the declaration.
Lists the standards referenced to demonstrate health and safety compliance.
To Next Page
