Why is the PTO shaft knocking on my Vicon Farm Equipment?
If the PTO shaft is knocking on your Vicon Farm Equipment, it might be because the top link between your tractor and the machine is too short, especially with low stubble height. To resolve this, increase the length of the top link.
What to do if suspension is in position in Vicon Farm Equipment?
If the suspension on your Vicon Farm Equipment is in a fixed position, try changing from the swath roller to the swathboard, or vice versa.
General| Brand | Vicon |
|---|---|
| Model | Extra 117 |
| Category | Farm Equipment |
| Language | English |
General safety advice and precautions for operating the machine.
Explains the meaning of safety symbols and labels used on the machine.
Details the various warning symbols and their implications for user safety.
Specifies the qualifications and training required for machine operators.
Instructions and safety precautions for attaching the machine to the tractor.
Information on weight limits, axle pressure, and tractor load capacity.
Safety guidelines and legal requirements for road transport.
General instructions and safety checks before operating the machine.
Safety procedures for safely disconnecting the machine from the tractor.
Describes the intended use and crops the machine is designed for.
Details the design, construction, and key features of the machine.
An overview with a diagram identifying major components of the machine.
Provides dimensions, weights, and specifications for different models.
Detailed technical specifications including power, weight, and dimensions.
Specifies the necessary weight, size, and features of the tractor.
Initial steps for setting up the machine after transport.
Safety instructions for lifting the machine using crane equipment.
Safety guidelines for connecting the machine to the tractor.
Procedures and safety checks for attaching the machine.
Detailed steps for connecting the tractor's linkage arms.
Settings for Category 1 linkage pins for machine attachment.
Settings for Category 2 linkage pins for machine attachment.
Procedures for setting the correct working height of the machine.
How to adjust and set the spring catch mechanism.
Instructions and safety for connecting and securing hydraulic systems.
Procedures for the initial test drive and operation.
Steps to place the machine in the correct position for transport.
Essential safety instructions before driving on public roads.
General compliance requirements for road traffic acts.
Pre-travel checks and preparation steps.
A checklist for inspecting the machine before road travel.
Guidelines for safe driving on public roads.
Safety precautions to be observed during machine operation.
Checks and preparations before starting machine operation.
How to adjust the stubble height for optimal cutting.
Procedures for operating the machine in the field.
Specific techniques for mowing on inclines.
How to perform turns at the end of a field section.
How the spring catch functions and what to do if an obstacle is hit.
How to adjust the cutting unit guard for optimal performance.
Safety steps and checks before cleaning the machine.
Recommended cleaning agents and methods.
Final steps after the machine has been cleaned.
Preparation steps before storing the machine for extended periods.
Procedures for safely parking and disconnecting the machine.
Guidelines for proper long-term storage of the machine.
Safety precautions specific to maintenance tasks.
General safety rules for performing repair and maintenance.
Safety advice regarding the handling of oils and lubricants.
General guidelines for performing maintenance procedures.
Explanations of key terms related to maintenance.
A schedule outlining when different maintenance tasks should be performed.
Critical safety measures before starting any maintenance.
Importance of using genuine parts for maintenance.
Ensures guards are in place for operator safety during maintenance.
How to inspect and maintain the PTO shaft.
Daily lubrication procedures for key components.
Procedures for routine checks and inspections.
Daily checks for oil levels in the cutterbar.
Maintenance and oil checks for the gearbox.
Inspection and maintenance of the machine's cutting knives.
Inspection and maintenance of the cutting discs.
External and internal inspection of the cones.
Inspection for wear and replacement of stone guards and counter knives.
Checking and tightening of the V-belt transmission.
Procedures for replacing parts related to the cutterbar.
Steps for changing the oil in the cutterbar and transmission.
Information on high skids for adjusting stubble height.
Description of the swathboard for guiding crop.
Details on the swath roller for crop guiding.
Information on the lighting kit for road transport.
Details on linkage pin compatibility for different tractor categories.
Features for quick and easy knife changes.
Equipment to aid crop flow on uneven terrain.
Device to prevent knife locking.
Accessory to secure the tarpaulin.
Description of the cone for crop flow.
Common faults related to the cutterbar and their solutions.
Common issues with the PTO shaft and their remedies.
Information on warranty period and claim procedures.
Guidelines for disposing of metal components.
Guidelines for disposing of rubber components.
Guidelines for disposing of plastic components.
Procedures for disposing of used hydraulic oil.
Table for converting units of measurement.
Recommended oils and lubricants for the machine.
To Next Page
