Why is the stubble uneven with my Vicon Extra 328?
To address uneven stubble with your Vicon Farm Equipment, several factors should be considered: * Increase your driving speed. * Verify that the tractor RPM on the PTO is adequate. * Turn or replace any blunt or missing knives. * Ensure the machine is correctly balanced by adjusting the ground pressure. * Set the hitch to the correct height. * Adjust the ground pressure if it's too low.
How to fix stripes in the stubble with Vicon Farm Equipment?
If you notice stripes in the stubble when using your Vicon Farm Equipment, consider the following: * Adjust the angle of the cutterbar to suit the crop. * Increase your speed. * If high skids are fitted on the cutterbar, remove them, ensuring the field is free of stones. * Check for any build-up of crop on the cutting discs.
What to do if the cutterbar gets abnormally warm on my Vicon Extra 328?
If the cutterbar of your Vicon Farm Equipment gets abnormally warm, there might be an issue with the oil. Inspect the oil level in the cutterbar. If the oil type is incorrect, change it to the correct one.
Why does my Vicon Farm Equipment hang directly to the rear during mowing?
If your Vicon Farm Equipment hangs directly to the rear during mowing, it could be due to several reasons. First, adjust the ground pressure, as there might be too much downward pressure from the cutterbar. Next, check the spring catch to ensure it's set correctly. Lastly, verify and set the correct height of the hitch.
What to do if Vicon Extra 328 Farm Equipment cannot be raised to the transport position?
If you are unable to raise your Vicon Farm Equipment to the transport position, it may be because the machine's transport lock is not activated. To resolve this, pull in the cord and activate the transport lock.
Why don't the hydraulic functions work on my Vicon Extra 328?
If the hydraulic functions on your Vicon Farm Equipment aren't working, check that the hydraulic hoses are correctly connected to the tractor's outlet. Also, make sure that the tractor hydraulics are engaged.
General| Brand | Vicon |
|---|---|
| Model | Extra 328 |
| Category | Farm Equipment |
| Language | English |
Identifies the intended users for the instruction manual.
Provides a general overview of safety instructions within the manual.
Explains the meaning of various symbols and pictograms used in the manual.
Emphasizes the importance of trained operators and adherence to safety instructions.
Details safety symbols and their meanings, including warning labels on the machine.
Outlines safety precautions for transporting the machine on public roads.
Covers essential safety practices for operating the machine, including guards and checks.
Highlights safety measures to be taken during maintenance and service work.
Defines the intended uses and crops for the machine.
Describes the machine's construction, features, and safety compliance.
Provides detailed data on machine dimensions and technical parameters.
Specifies the necessary tractor size and weight for safe operation.
Guides on initial assembly, PTO shaft setup, and safe first-time connection.
Explains how to modify the machine's cutting width for optimal performance.
Details the process and safety for connecting the machine to the tractor.
Covers locking lift arms, PTO shaft connection, and hitch adjustment.
Instructions for attaching the PTO shaft and connecting hydraulic hoses.
How to prepare the machine for transport, including height considerations.
Details legal requirements for road transport, including lighting and markings.
A checklist for ensuring the machine is ready and safe for road travel.
Essential safety checks and instructions before starting machine operation.
Step-by-step guide on how to operate the machine in the field.
Instructions on setting stubble height and managing ground pressure for optimal performance.
Guidelines for safely cleaning the machine, including power disconnection and PPE.
Steps to take after cleaning, including drying and lubrication.
Procedures for safely disconnecting and parking the machine in its working position.
Steps for preparing the machine for winter or long-term storage.
Covers safety during maintenance, use of spare parts, and lubrication safety.
Details the schedule and steps for various maintenance tasks.
Instructions for lubricating moving parts, PTO shaft, and checking oil levels.
Guidance on checking and replacing parts like cutterbars, knives, and universal joints.
Information on optional high skids for stubble height and chains for lift arms.
Details optional quick release systems for knives and crop carriers.
Describes optional lighting kits, straw dividers, and swath rollers.
Common problems and solutions for the hydraulic system.
Addresses issues like uneven stubble, stripes, and cutterbar temperature.
Troubleshooting common problems related to the PTO shaft.
Explains the warranty period, exclusions, and how to make a claim.
Outlines limitations of liability and emphasizes user responsibility for correct usage.
Instructions for disposing of metal, rubber, plastic, and electronic components.
Guidance on the correct disposal of used hydraulic oil.
Declares that the product meets EU safety requirements and applied standards.
Provides conversion figures for various units of measurement.
Lists recommended oils and lubricants for different machine components.
Details the correct torque values for tightening various bolts.
To Next Page
