Operation
41
Operation
Safety
The operator should be instructed carefully before the machine
is put into use
The machine should only be used if the operator has been given
thorough instructions.
Thorough machine instruction allows safe usage.
Insufficient instructions can result in wrong usage of the machine and
accidents.
Limitation of the hydraulic flow of the tractor
Limit the hydraulic flow of the tractor.
This will ensure the hydraulic system does not overheat and overload.
Overloading the hydraulic system may result in serious injuries.
The hydraulic flow of the tractor should therefore be limited to:
• 50 l/min
• 13.2 gal./min. (US)
• 11 gal./min (imp.)
Read the safety instructions before using the machine
Before using and loading the machine the operator should read the
safety instructions carefully.
»Safety« page 5
Attention to the safety instructions assures the personal safety of
yourself and others.
Failure to follow the instructions may result in serious injuries.
Work on the machine should only be carried out by persons who
have been thoroughly instructed
The machine should only be operated when the operator has been
given thorough instructions.
Thorough machine instruction allows safe usage.
Insufficient training may lead to incorrect usage of the machine and
accidents.
Do not remove the protective guards
Check that all protective guards are in place before use.
This ensures that the machine will offer maximum protection to the
operator.
If the safety guards are removed or not used it may result in serious
injuries and accidents.
To Next Page
Loading...
