Why is the stubble uneven with my Vicon Extra 332?
To address uneven stubble with your Vicon Farm Equipment, several factors should be considered: * Increase your driving speed. * Verify that the tractor RPM on the PTO is adequate. * Turn or replace any blunt or missing knives. * Ensure the machine is correctly balanced by adjusting the ground pressure. * Set the hitch to the correct height. * Adjust the ground pressure if it's too low.
How to fix stripes in the stubble with Vicon Extra 332?
If you notice stripes in the stubble when using your Vicon Farm Equipment, consider the following: * Adjust the angle of the cutterbar to suit the crop. * Increase your speed. * If high skids are fitted on the cutterbar, remove them, ensuring the field is free of stones. * Check for any build-up of crop on the cutting discs.
What to do if the cutterbar gets abnormally warm on my Vicon Extra 332?
If the cutterbar of your Vicon Farm Equipment gets abnormally warm, there might be an issue with the oil. Inspect the oil level in the cutterbar. If the oil type is incorrect, change it to the correct one.
Why does my Vicon Farm Equipment hang directly to the rear during mowing?
If your Vicon Farm Equipment hangs directly to the rear during mowing, it could be due to several reasons. First, adjust the ground pressure, as there might be too much downward pressure from the cutterbar. Next, check the spring catch to ensure it's set correctly. Lastly, verify and set the correct height of the hitch.
What to do if Vicon Extra 332 Farm Equipment cannot be raised to the transport position?
If you are unable to raise your Vicon Farm Equipment to the transport position, it may be because the machine's transport lock is not activated. To resolve this, pull in the cord and activate the transport lock.
Why don't the hydraulic functions work on my Vicon Extra 332 Farm Equipment?
If the hydraulic functions on your Vicon Farm Equipment aren't working, check that the hydraulic hoses are correctly connected to the tractor's outlet. Also, make sure that the tractor hydraulics are engaged.
Provides general safety instructions and emphasizes personal safety.
Illustrates and explains safety labels and warning signs found on the machine.
Details the meaning of various warning and informational symbols used in the manual.
Specifies the qualifications required for operating the machine.
Details safe procedures for connecting and attaching the machine to a tractor.
Outlines safety regulations and practices for transporting the machine on public roads.
Covers essential safety checks and procedures before and during machine use.
Provides critical safety steps for safely disconnecting the machine from the tractor.
Details safety guidelines to follow when performing maintenance on the machine.
Guides the initial assembly and setup of the machine for use.
Covers the safe procedures for connecting the machine to the tractor.
Provides detailed steps for attaching the machine to the tractor's lift arms.
Covers safety precautions related to the machine's hydraulic system.
Guides the initial test drive and functional checks after connecting the machine.
Explains how to secure the machine in its transport position for safe travel.
Emphasizes adherence to road traffic laws and safety for transport.
Lists essential pre-travel checks for the machine.
Safe driving practices and speed adjustments for road travel.
Crucial safety checks and instructions before starting machine operation.
Procedures for safely parking and disconnecting the machine from the tractor.
Critical safety warnings and procedures for performing maintenance.
Safety precautions when performing maintenance, focusing on stopping the tractor and securing the machine.
Common problems and remedies related to the machine's hydraulic system.
Troubleshooting guide for issues affecting the cutterbar's performance.
General| Brand | Vicon |
|---|---|
| Model | Extra 332 |
| Category | Farm Equipment |
| Language | English |
To Next Page
