EasyManua.ls Logo

Vicon Extra 332 - Gearbox Oil Check

Vicon Extra 332
111 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance
63
Gearbox
Pay attention when carrying out oil change
Use barrier cream or protective gloves when changing oil.
It will protect your hands against skin injuries.
Direct contact with the oil could lead to serious skin injuries.
Use the correct oil type
Always use the correct oil type for the transmission.
This will ensure the transmission has a long service life.
Using the incorrect oil type may damage the transmission.
Maintain correct oil level
The maximum and minimum oil level indicators on the transmission
must not be exceeded.
Correct transmission oil level will ensure a long service life.
Incorrect oil levels can cause the transmission to overheat, resulting
in serious damage.
General
When checking or changing the oil in the transmission, the machine
must be placed in the working position on a stable, horizontal, level
surface.
Main gear - tractor
Checking the oil level
Every 80 hours of use
The oil level is checked as follows:
»Maintenance intervals« page 56
Remove the oilplug.
Check that the oil is filled all the way up to the hole.
If necessary, top up the oil to the correct level.
»Lubricants« page 109
Fit the oilplug and tighten it.
Oilplug
For tractor PTO outlets with a rotational speed of
540 rpm, the oilplug will be located here.

Table of Contents

Other manuals for Vicon Extra 332

Related product manuals