Operation
39
Operation
Safety
Read the safety instructions before using the machine
Before using and loading the machine the operator should read the
safety instructions carefully.
»Safety« page 5
Attention to the safety instructions assures the personal safety of
yourself and others.
Failure to follow the instructions may result in serious injuries.
Work on the machine should only be carried out by persons who
have been thoroughly instructed
The machine should only be operated when the operator has been
given thorough instructions.
Thorough machine instruction allows safe usage.
Insufficient instructions can result in wrong usage of the machine and
accidents.
Do not remove the protective guards
Check that all protective guards are in place before use.
This ensures that the machine will offer maximum protection to the
operator.
If the safety guards are removed or not used it may result in serious
injuries and accidents.
Before operating
Make sure that the initial start of the machine is unhindered
Make sure the area around the machine is checked before start up.
Paying attention to the area around the machine will prevent injury to
persons or animals.
Insufficient attention to the area around the machine can result in
serious injuries.
Keep distance to the machine
No unauthorised persons should be close to the machine when active.
This will ensure that no dangerous situations can arise.
Persons close to the machine during operation are at risk of being
severely injured.
Make a specific check for children
Make sure the area around the machine is checked before start up.
Paying attention to the area around the machine will prevent injury to
children.
Insufficient attention to the surrounding area can result in serious
injuries.
• Check all points mentioned in the “maintenance” section.
»Specific safety information« page 54
»Lubrication safety and use of oil« page 54
• Check knives are not worn down. The knives can be turned so they
rotate in the opposite direction.
»Knives« page 65
To Next Page
Loading...
