Disposal
106
Disposal
When the machine reaches the end of its service life, it must be
disposed of in the correct way. Observe the following:
Metal parts
Send usable parts to an authorised recycling station. Larger scrap
parts must be taken to an authorised breaker's yard where they can
be processed in accordance with current regulations.
Rubber parts
Send usable parts to an authorised recycling plant where they can be
processed in accordance with current regulations.
Plastic
Send usable parts to an authorised recycling plant where they can be
processed in accordance with current regulations.
Hydraulic oil
All oil must be emptied from the machine.
Used oil must be taken to a breaker's yard where it can be processed
in accordance with current regulations.
Electronic parts
Send usable parts to an authorised recycling plant where they can be
processed in accordance with current regulations.
To Next Page
Loading...
