Vicon Extra 332 - Lubrication

Maintenance
58
Lubrication
Every 40 hours of use
Cutting unit
 Press the nozzle on the grease gun over the grease nipple.
 Pump 1, max. 2 times with the grease gun.
 »Maintenance intervals« page 56
 »Lubricants« page 109
Every 100 hours of
use
PTO shaft
 Press the nozzle on the grease gun over the grease nipple.
 Pump 1, max. 2 times with the grease gun.
 »Maintenance intervals« page 56
 »Lubricants« page 109
 Press the nozzle on the grease gun over the grease nipple.
 Pump 1, max. 2 times with the grease gun.
 »Maintenance intervals« page 56
 »Lubricants« page 109
58.237.000
58.237.000
58.237.000