Operation
46
Working in the field
Check the surrounding area before starting to use the machine
Before driving and using the machine the surrounding area should be
checked.
This prevents persons and animals in the vicinity from being harmed.
If the surrounding area is not checked, it may result in serious injuries
to persons or animals.
The machine is operated in the following way:
Activate the tractor's hydraulics and the pull the machine's cutting
unit together to release the transport lock.
Pull in the cord to release the transport lock.
Activate the tractor hydraulics and lower the machine's cutting unit
to the working position.
Release the cord.
Set the tractor's hydraulic system to the floating position.
Check that all guards on the machine are folded out and correctly
positioned.
Connect the tractor's PTO outlet.
Carefully increase the speed on the PTO shaft to 1000 RPM.
Find a suitable speed on the tractor and start to mow.
To Next Page
Loading...
