Safety
7
Meaning of the symbols
Stop the tractor before working on the machine
Be careful! Always let the tractor come to a stop and remove the
ignition key before you repair, rinse, lubricate or carry out any
maintenance work on the machine.
Read and observe the instruction manual
Be careful! Read and ensure you understand the instruction manual
before the machine is used.
Ensure no clothing/body parts get caught in the PTO shaft
Guards may not be removed or opened until the machine has stopped
rotating. The tractor engine must be stopped, the ignition key removed
and the handbrake applied.
Risk of trapping fingers or hands
Be careful of springs and moving parts when the machine is swivelled
to the transport or working position.
Standing between the tractor and the tool can be dangerous
There is a high risk of becoming trapped if you get in between the
tractor and the tool. No-one should enter the hazard area during
connection and disconnection of the tool, and the tractor's handbrake
should always be applied.
Use the correct support for the machine
Your body could become caught!
Never work under the machine without using the correct support. The
tractor engine must be stopped, the ignition key removed and the
handbrake applied.
To Next Page
Loading...
